The Professional And Thoughtful Service for The Transmitting Antenna Coil Made Mr. Wang Place The Order without Hesitation

The professional and thoughtful service for the transmitting antenna coil made Mr. Wang place the order without hesitation

The function of a transmitting antenna is to radiate the energy transmitted by the feeder into the surrounding space, and this radiation has different directivities depending on the type of antenna. For example, a vertically placed half-wave dipole antenna has its own radiation direction. Thanks to our professional and considerate service, Mr. Wang chose us without hesitation.

 

The basic principle of a transmitting antenna is as follows: Electricity travels in a conductor at a speed close to that of light, and when it encounters a discontinuity in the conductor, it is reflected back to the signal source. If the current is alternating and the reflected current returns to the origin or feeding point at the right moment, the current will be reinforced in subsequent cycles, so that only a small amount of energy is needed to maintain the standing wave in the antenna. That is, the antenna is in a resonant state due to the existence of the standing wave, thereby radiating radio waves into space. In the resonant state, the voltage is very low at the midpoint where the current is maximum, but extremely high at both ends. Ohm's law applies to the antenna: at the midpoint, due to the large current and low voltage, the resistance is small; at both ends, the situation is exactly the opposite, so the impedance is high.

 

Mr. Wang found us through the China Suppliers website and asked if we could manufacture transmitting antenna coils. From the communication with Mr. Wang, we found that it was also the first time for them to make this type of transmitting antenna. They had previously approached many suppliers, but none of them met their requirements, as the signal of the transmitting antenna was too weak during debugging.

 

Mr. Wang did not have relevant drawings, so he could only send samples for us to study. Upon receiving the transmitting antenna, we gathered our company's R&D team to research the coil. Finally, we successfully produced an identical product and informed Mr. Wang of this good news. Mr. Wang then requested our company to send 5 PCS of samples for their testing.

 

After receiving the samples sent by our company, Mr. Wang arranged for on-line testing. On the third day, Mr. Wang called me, saying that the test was particularly successful. Our coils were better than any other supplier's and had unique features. He immediately placed an order for 10,000 PCS with us, requiring us to deliver in batches, and there would be a subsequent order of 200K.

 

Why did Mr. Wang finally choose us?

 

1. Golden Eagle Electronics has a professional R&D team that few can compare with.

2. Golden Eagle Electronics fully adopts Nittoku fully automatic winding machines, with 90% of the production lines being automated. The output of one automated production line exceeds that of nearly 100 people in a traditional factory, saving labor costs.

3. Golden Eagle Electronics implements closed management in its production workshops to ensure a dust-free environment and guarantee coil precision.

4. Golden Eagle Electronics adopts the Toyota lean production model, where products are produced on the same day as materials are input. This not only reduces warehousing costs but also allows for rapid adjustment of production according to orders to meet customer needs.