The professional and considerate service of the antenna coil led Mr. Wang to place the order without hesitation.

The function of the transmitting antenna is to radiate the energy transmitted by the feeder to the surrounding space. And this radiation has different directional properties depending on the type of antenna. The radiation direction of a vertically placed half-wave symmetrical dipole antenna was chosen by Mr. Wang without hesitation due to our professional and considerate service.

The basic principle of the transmitting antenna is as follows: Electricity travels through the conductor at a speed close to that of light. When it encounters a discontinuity point within the conductor, it will be reflected back to the signal source. If the current is alternating and the reflected current returns to the origin or the feed point at the appropriate time, then the current will be reinforced in subsequent cycles, thus only a small amount of energy is needed to maintain the standing wave within the antenna. That is because the existence of the standing wave causes the antenna to be in a resonant state. Thus, it emits radio waves into space. In the resonant state, the voltage is very small at the midpoint where the current is at its maximum, but it has a maximum value at both ends. Ohm's law applies to the antenna. At the midpoint, due to the large current, the voltage is low, so the resistance is small. At the ends, the situation is exactly the opposite, so the impedance is high.

Mr. Wang found us through the Chinese supplier website and asked if we could produce the antenna coil for the launch. Through communication with Mr. Wang, it became clear that they were also new to making this type of antenna. They had previously sought out many suppliers but none of them met their requirements. During the debugging process, the signal of the antenna was too weak.

Mr. Wang didn't have the relevant drawings. So he could only send us samples for us to study. When we received the transmitting antenna, we convened our company's R&D team to study the coil. We tried to produce the same product and informed Mr. Wang of this good news. Mr. Wang asked our company to send 5 pieces of samples to them for experimentation.

After receiving the samples sent by our company, Mr. Wang arranged for the online experiment. On the third day, Mr. Wang called me. This experiment was particularly successful. Our coil was better than that of any other company, and it had its own unique features. He immediately placed an order for 10,000 PCS and asked us to deliver them in batches. There will also be an order of 200K in the future.

Why did Mr. Wang ultimately choose us?

The professional R&D team of Golden Eagle Coils is truly unparalleled by any other group.

2. All Golden Eagle Coils are produced using Jite's fully automatic winding machine. The production line is fully automated, with 90% of the process being automated. A single automated production line can produce output equivalent to that of a traditional factory with over 100 workers, significantly reducing labor costs.

3. The Golden Eagle Coils production workshop implements closed management to ensure that the workshop is dust-free and to guarantee the accuracy of the coils.

4. Golden Eagle Coils adopts the Toyota Lean Production model. Products are completed on the same day as the materials are received. This not only reduces storage costs but also enables quick production adjustments based on orders, ensuring customer satisfaction.