The Golden Eagle frame coil has a production area of nearly 40000 square meters.

The Golden Eagle frame coil has a production area of nearly 40,000 square meters. Currently, there are few companies in the industry that have such a large scale. The Golden Eagle frame coil production base has three major factories in the mainland, one of which is in Dongguan. The company has approximately 800 employees who serve as end customers for the frame coils. The frame coils are exported to over 30 countries: the United Kingdom, Israel, the United States, Germany, Japan, the Philippines, Canada, Singapore, France, Malaysia, South Korea, Thailand, etc. As long as the materials are in place, the finished products can be delivered to the customers on the same day. Golden Eagle frame coils have received a large contract worth millions from a state-owned enterprise thanks to its large-scale production.

Miss Chen is a research and development procurement officer for a state-owned enterprise. This project has lasted for three years. Due to the long duration of the project, the original cooperating supplier couldn't see the order and the products were repeatedly found to be unqualified during the inspection process, thus no longer cooperating with Miss Chen's case. There were also very good cooperating suppliers during this period, but due to the small factory size, they failed to pass the customer's review. Miss Chen could only search for several frame coil manufacturers through the online platform. Because this frame coil requires a配套 solution， she gave up this project during the cooperation period.

Under the pressure of the leader， Miss Chen finally found Golden Eagle frame coils. At the beginning， there were no materials， only a 3D-printed frame was provided. The actual number of coils needed to be unified， the tape should be thin and without any flaws， the copper foil cutting needed to be consistent with the width of the frame winding， and the resistance value difference should be controlled within 3%. After a week of communication， sample production， and meeting exchanges， three problems needed to be solved.

First， the number of coils must be monitored 100%. To solve this problem， we first purchased a coil number testing instrument. Second， the requirements for cutting the copper foil are very precise. It cannot damage the glue on the back of the copper foil， and the size also needs to be very accurate. After testing three cutting knives， I led the engineer directly to the cutting manufacturer and requested them to make molds according to the size to meet the customer's requirements. During the several days of visits and exchanges with the supplier， the cutting of the copper foil material was finally completed satisfactorily. Third， the white tape cannot have any flaws. There were bulges， dirt， and uneven tapes in the previous sample sending. After personally going to the supplier's site to sort it out， the three requirements of the customer were perfectly solved， and the first batch of frame coil samples were successfully sent out. It took one month to successfully secure the million-dollar contract from the customer.